Detailed Instructions to Order a 2-Cut Corners Hot Tub Cover:
Step 1: Provide Fold Direction & Measurements for your cover.
Fold Direction: Select whether you want Dimension "A" or Dimension "B" to be cut in half for the fold. Decide carefully as this will determine the fold orientation. You will notice the diagram above will change as you select between the 2 fold directions.
A, B, C, D, E: Provide dimensions of your spa or cover, as shown in the picture above and double-check your measurements. (Round UP to the nearest inch). Note: Covers over 96" are not available.
R (Corner Radius): Corners labeled "R" in the diagram may or may not be rounded. If the corners are rounded, hold a carpenters square to the corner of your existing cover or hot tub. Measure from the inside corner of the square - to where the square first touches the cover or hot tub.
It is important your cover isn't too small, but is fine to be a little big, so always round DOWN to the nearest inch when determining the radius. A smaller corner radius will mean less of the corner will be cut off and will result in a larger cover.
Skirt Length: Measure the skirt from the bottom of your cover to the end of your skirt (as pictured in the diagram). If you don't have an existing cover to measure, note that the skirt is meant to cover the acrylic lip on your spa, so you can measure the width of your spa lip. (Measure in inches)
Straps Length: Measure from the bottom of the skirt to the end of the locking clip (include the clip in your measurement). Your new cover will come with the male and female sides of the locking clip. (Measure in inches)
Step 2: Provide the Make & Model of your Hot Tub.
This information is not required - Provide if known.
Step 3: Select Thickness and Density of your Foam Insulation.
The thickness and density of foam is personal preference. The thicker and denser the foam insulation is, the higher the R-Value (insulation value) and the stronger the cover will be. We offer 4 choices:
| || $369.99 |
4" to 2" Tapered, 1.0 lb Foam
Still a good cover, but made with lighter density foam for those on a budget. 1 Year Warranty
| || $399.99 |
4" to 2" Tapered, 1.5 lb Foam
A very good choice, made with medium density foam. 3 Year Warranty
| || $429.99 |
4" to 3" Tapered, 2.0 lb Foam
Our best selling cover, made with high density foam. 3 Year Warranty
| || $524.99 |
5" to 4" Tapered, 2.0 lb Foam
Made extra thick with high density foam for the ultimate in insulation value and strength. 3 Year Warranty
Last Step: Select your color.