Detailed Instructions to Order an Octagon Hot Tub Cover:

Step 1: Provide Measurements for your cover.

A, B, C: Provide dimensions of your spa or cover as shown in the diagram above (Round UP to the nearest inch). Notes: Dimensions "A" & "B" and all eight "C" sides should be equal lengths on an Octagon. If your spa doesn't have all sides of equal lengths, then you should be ordering a 4-cut corner cover. Covers over 96" are not available.

Skirt Length: Measure the skirt from the bottom of your cover to the end of your skirt (as pictured in the diagram). If you don't have an existing cover to measure, note that the skirt is meant to cover the acrylic lip on your spa, so you can measure the width of your spa lip. (Measure in inches) Straps Length: Measure from the bottom of the skirt to the end of the locking clip (include the clip in your measurement). Your new cover will come with the male and female sides of the locking clip. (Measure in inches)

Step 2: Provide the Make & Model of your Hot Tub.

This information is not required - Provide if known.

Step 3: Select Thickness and Density of your Foam Insulation.

The thickness and density of foam is personal preference. The thicker and denser the foam insulation is, the higher the R-Value (insulation value) and the stronger the cover will be. We offer 4 choices:

	$369.99 4" to 2" Tapered, 1.0 lb Foam Still a good cover, but made with lighter density foam for those on a budget. 1 Year Warranty
	$399.99 4" to 2" Tapered, 1.5 lb Foam A very good choice, made with medium density foam. 3 Year Warranty
	$429.99 4" to 3" Tapered, 2.0 lb Foam Our best selling cover, made with high density foam. 3 Year Warranty
	$524.99 5" to 4" Tapered, 2.0 lb Foam Made extra thick with high density foam for the ultimate in insulation value and strength. 3 Year Warranty

Last Step: Select your color.