Home  |  Store |  Spa Info & Troubleshooting  |  Ordering  |  Shipping  |  Search  |  Contact Us 
   

Welcome to our
US Store

For our Canadian Store CLICK HERE

Home
All Products
Accessories
Chemicals
Covers
Cover Removers
Filter Cartridges
Fragrances
Ozonators
Parts Department
Pumps & Heaters
Rubber Ducks
Specials

  

Hydroquip 800 Series
Air Control Spa Heaters

The Hydroquip 800 includes cords & receptacles for a 2 speed pump, blower and ozonator. It also includes a 110V receptacle for an optional light transformer (sold separately). This spa control is light-weight and can be installed on plumbing without support. It can even be installed directly on top of a pump using a PVC elbow.

The compact design enables the heater to fit in tight locations. The box measures 7.5" wide, 5" high & 5.5" deep (to the back of the heater). The heater tube is 15" wide from flange to flange.
bulletThe plug-in version (CS-800-A2) includes a 15 foot cord with a cord end GFCI. Other versions have a 3 foot power cord to connect to your wiring.
bulletpump cord, blower cord & ozonator cord with amp style connectors
bullet2 air buttons & tubing
bulletheater unions with o-rings
bulletfull range thermostat
bulletheater on light
bulletpressure switch controlled heater to prevent heater from operating without water in heater manifold
bullethigh limit protection to prevent over-heating
bulletoperations manual
bulletUL and ETL recognized
bullet1 year parts warrantee
 
CS-800-A2 with 15 Amp GFCI, plug-in cord
- 110V Main Power (1.1 kW heater)
- 110V 2-speed pump circuit, blower circuit & ozonator circuit

$ 319.99 US
Quantity:
CS-800-B2
-Main Power connection (3 foot cord) can be wired to120V or 240V
(1.1 kW heater on 110V, 4.5 kW on 240V)
- 110V 2-speed pump circuit
- 110V blower circuit
- 110V ozonator circuit

$ 299.99 US
Quantity:
CS-800-C2
-220V Main Power connection (3 foot cord)
(4.5 kW heater)
- 220V pump circuit
- 110V blower circuit
- 110V ozonator circuit

$ 299.99 US
Quantity:
Light Transformer Kit
Includes box with 110V to 12V light transformer, air switch, power cord, light cord, bulb, air button & air line. Part Number: 37-0031-SM

$ 49.99 US
Quantity:

Notes:
- The CS-800-B2 & CS-800-C2 must be hooked up to a GFCI protected line.
- Because spa heaters use a pressure switch, they must be installed on the discharge side of the pump.


© 2000 - 2007 Hot Tub Essentials Inc. All rights reserved.
Serving the USA and Canada with quality hot tub products and superior service!
   
 
[Accessories] [Chemicals] [Covers] [Cover Removers] [Filter Cartridges] [Fragrances] [Ozonators] [Parts Dept] [Pumps and Heaters] [Rubber Ducks] [Specials]