Home  |  Store |  Spa Info & Troubleshooting  |  Ordering  |  Shipping  |  Order Tracking  |  Contact Us  
   

Welcome to our
US Store

For our Canadian Store CLICK HERE

Home
All Products
Accessories
Chemicals
Covers
Cover Removers
Filter Cartridges
Fragrances
Ozonators
Parts Department
Pumps & Heaters
Rubber Ducks
Specials

  

6000 Complete Spa Pack
With 2-speed Pump
(Mechanical / Air Button Controlled)

Hydroquip has over 25 years of experience in the designing and manufacturing of hot tub equipment. Built in the USA, you can trust the name Hydroquip for quality and reliability and count on many years of trouble-free service.

*Some assembly required.

Order Here
From $ 695 US
Free Shipping & Handling!

More Details

Main Power
120 Volt Service
240 Volt Service

2-Speed Pump
1.0 HP - 120 Volt Pump
1.5 HP - 120 Volt Pump
 (add $20.00)
2.0 HP - 240 Volt Pump
 (add $20.00)
3.0 HP - 240 Volt Pump
 (add $30.00)
4.0 HP - 240 Volt Pump
 (add $80.00)
Blower Circuit
120 Volt Circuit Only
240 Volt Circuit Only
Add Blower (add $47.00)

Ozonator Circuit
120 Volt Ozone Circuit Only
240 Volt Ozone Circuit Only
Add 120 Volt Del Ozonator
 (add $75.00)
Add 240 Volt Del Ozonator
 (add $85.00)

Optional Internal GFCI
No GFCI
Include GFCI (add $67.00)

Additional Pump Circuit
No Additional Circuit
Add 120 Volt Pump Circuit
 (add $35.00)
Add 240 Volt Pump Circuit
 (add $35.00)


Quantity:
Main Power - Select the voltage that your spa will be hooked up to.
-If you select 120 V Main Power, then all circuits & components must be 120V.
- If you select 240 V Main Power, then all circuits & components can be either 120 or 240 Volts.

2-Speed Pump
Select the Horse Power of your pump. It is best to replace your pump with same HP as the original, or you can increase by 1 HP Maximum if you want a little more jet pressure. If your Main Power is 240V, we recommend selecting a 240 Volt pump.

Blower Circuit
You can operate a blower on this circuit and a cord is included. Select the voltage of your blower or purchase a new one if needed. If you don't need this receptacle, we recommend selecting 120V. You can later change the voltage of this circuit if required.

Ozonator Circuit
You can operate an ozonator on this circuit and the J&J mini cord is included. Select the voltage of your ozonator. We recommend matching your ozone voltage to the main pump voltage, if you only want the ozonator to come on when the low speed pump is on. If you don't need this receptacle, we recommend selecting 120V. You can later change the voltage of this circuit if required.

Optional Internal GFCI
If you are replacing a spa pack with an internal GFCI, you can add an internal GFCI here.
Note: do not select this option if you already have a GFCI on your spa because it is not recommend to have 2 GFCI breakers on the same circuit. When the GFCI option is added, the pack box will be 3" taller - P/N CS-9000-U1-HC.

Additional Pump Circuit
This system is already equipped with a 2-speed pump and a blower circuit. However, if you require an additional pump circuit, select the voltage of your pump here. P/N CS-9000-U2.

Valuable items included:

bulletAir buttons and tubing for each circuit
bulletEquipment cords for included for all circuits. Cords light up when circuit is energized.
bulletInternally mounted thermostat
bulletHeater fittings with o-ring gaskets, pump unions with o-rings & elbow assembly to connect pump to heater are included.
bulletInstallation and operation manual included.
bulletIncludes wiring for 12 V light and includes bulb.
bulletIncludes pack base and fasteners to install equipment on base. The heater, pump, blower & elbow assembly come packaged separately, but are wired and ready to be connected. See assembly instructions.

More than just standard features:

bulletVDS™ (Visual Diagnostics System) - Indicator lights
inform you of wiring or equipment problems and eliminate installation errors. Virtually anyone can troubleshoot at a glance, making future maintenance issues simple to understand and correct.
bulletUniversal features - main power convertible for either 110V or 220V service supply
bulletUniversal 2-speed pump circuit - supports 110V or 220V (color coded 48" Smart Cord included)
bulletUniversal Ozonator circuit - supports 110V or 220V (color coded 48" Smart Cord included)
bulletUniversal Blower circuit - supports 110V or 220V (color coded 48" Smart Cord included)
bullet1.4/5.5 kW, 110/220V heater in stainless steel manifold
bullet12V Light circuit with 96" cord
bullet24 hour timer
bulletFull range thermostat
bulletHeater ON light
bulletPressure switch controlled heater to prevent heater from operating without water in heater manifold
bulletHigh limit protection to prevent over-heating
bulletSpa side control plug-in for top side controls. Alternatively, air button controls are included for each component
bulletMis-wire protection circuit
bulletWall & foot mounting brackets
bulletCompact design for easy installation
- 19.5" length to outside of white PVC unions, 11" height from floor to top, 3.5" depth
bulletUL and ETL recognized
Smart Cord Diagnostics
Hydroquip's revolutionary Smart Cords light up when energized, indicating when components such as pumps, blowers, ozonators, etc. have power. This allows for easy component failure detection!
Note: Number of cords will vary with model.		  

Note: This control system must be hooked up to a GFCI protected line. If you would like an internal GFCI, select the option above.


 © 2000 - 2009 Hot Tub Essentials Inc. All rights reserved.
Serving the USA and Canada with quality hot tub spa supplies, accessories, spa parts & hot tub cover lifts!
   
 
[Accessories] [Chemicals] [Covers] [Cover Removers] [Filter Cartridges] [Fragrances] [Ozonators] [Parts Dept] [Pumps and Heaters] [Rubber Ducks] [Specials]