
Home \| Store \| Spa Info & Troubleshooting \| Ordering \| Shipping \| Order Tracking \| Contact Us

Welcome to our
US Store

For our Canadian Store CLICK HERE

6200 Complete Digital Spa Pack
With 2-speed pump

Hydroquip has over 25 years of experience in the designing and manufacturing of hot tub equipment. Built in the USA, you can trust the name Hydroquip for quality and reliability and count on many years of trouble-free service.

*Some assembly required.

Order Here
From $ 749 US
Free Shipping & Handling!

More Details

Main Power - Select the voltage that your spa will be hooked up to.
-If you select 120 V Main Power, then all circuits & components must be 120V.
- If you select 240 V Main Power, then all circuits & components can be either 120 or 240 Volts.

2-Speed Pump
Select the Horse Power of your pump. It is best to replace your pump with same HP as the original, or you can increase by 1 HP Maximum if you want a little more jet pressure. If your Main Power is 240V, we recommend selecting a 240 Volt pump.

Pump 2 / Blower Circuit
You can operate a pump or blower on this circuit and a cord is included. Select the voltage of your second pump or blower.
If you don't need this receptacle, we recommend selecting 120V. You can later change the voltage of this circuit if required.

Ozonator Circuit
You can operate an ozonator on this circuit and the J&J mini cord is included. Select the voltage of your ozonator. If you don't need this receptacle, we recommend selecting 120V. You can later change the voltage of this circuit if required.

Optional Internal GFCI
If you are replacing a spa pack with an internal GFCI, you can add a GFCI here. Note: do not select this option if you already have a GFCI. When the GFCI option is added, the pack box will be 3" taller and
becomes P/N CS-9200.

Additional Pump Circuit
This system is already equipped with a 2-speed pump and a secondary pump or blower circuit.
However, if you require a 3rd pump circuit, select the voltage of your pump here. Your spa pack will be upgraded to the CS-6230 (or CS-9230) when an additional pump circuit is purchased.

Includes toll free technical support from Hot Tub Essentials and the following:

	Digital top-side control with acrylic adapter plate
	Color coded "Smart Cords" - equipment cords for all circuits that light up when circuit has power.
	Thermostat probe drywell assembly included. (You can slide the temperature sensor in behind the plate on the heater assembly, if you don't want to install the thermal well in your spa shell.)
	Heater fittings with o-ring gaskets, pump unions with o-rings & elbow assembly to connect pump to heater are included.
	Installation and operation manual included.
	Includes wiring for 12 V light and includes bulb.
	Includes pack base and fasteners to install equipment on base. The heater, pump, blower & elbow assembly come packaged separately, but are wired and ready to be connected. See assembly instructions.

Topside Control Included

Adapter plate also included. If you are replacing a larger topside or covering air button holes, install the adapter plate first to cover a larger area.

More than just standard features:

	VDS™ (Visual Diagnostics System) - Indicator lights inform you of wiring or equipment problems and eliminate installation errors. Virtually anyone can troubleshoot at a glance, making future maintenance issues simple to understand and correct.
	Solid State electronic components and circuitry for increased reliability and accurate temperature settings
	Programmable top-side control included. You can set the length of up to 3 daily filtration cycles. Digital temperature and functions read-out. Includes adapter plate for use if you currently have a larger top-side control.

	Universal features - main power convertible for either 110V or 220V service supply
	Universal 2-speed pump circuit - supports 110V or 220V (color coded 48" Smart Cord included)
	Universal Auxiliary circuit - operate a secondary 1-speed pump or blower - supports 110V or 220V (color coded 48" Smart Cord included) If you have a 2-speed secondary pump, please contact us because we have systems that can accommodate.
	Universal Ozonator circuit - supports 110V or 220V (color coded 48" Smart Cord included)
	1.4/5.5 kW, 110/220V heater in stainless steel manifold
	Full range solid state thermostat for precision accuracy
	12V Light circuit with 96" cord
	Fiber optic light ready
	Freeze protection mode - if a low temperature is sensed the pumps and blower will purge the system every two hours in addition to the set filtration cycles
	Heater ON light
	Pressure switch controlled heater to prevent heater from operating without water in heater manifold
	Mis-wire protection circuit
	Automatic time-out for light, pump and auxiliary circuit component
	High limit protection to prevent over-heating
	Wall & foot mounting brackets
	Compact design for easy installation - 19.5" length to outside of white PVC unions, 11" height from floor to top, 3.5" depth Note: If the GFCI option is ordered, the control panel will have a height of 15"
	UL and ETL recognized

All 6200s come with Smart Cord Diagnostics!
Hydroquip's revolutionary Smart Cords light up when energized, indicating when components such as pumps, blowers, ozonators, etc. have power. This allows for easy component failure detection!
Note: Number of cords will vary with model.

Note: This control system must be hooked up to a GFCI protected line. If your main electrical service for your hot tub is not GFCI protected, select the High Current GFCI option above.

[Accessories] [Chemicals] [Covers] [Cover Removers] [Filter Cartridges] [Fragrances] [Ozonators] [Parts Dept] [Pumps and Heaters] [Rubber Ducks] [Specials]

6200 Complete Digital Spa Pack With 2-speed pump

6200 Complete Digital Spa Pack
With 2-speed pump