Welcome to our
US Store
For our Canadian Store
CLICK HERE
|
|
Hot tub circulation pumps
Circulating pumps are generally installed to filter your hot tub 24
hours a day or to circulate water through a heat exchanger off a hot
water tank or boiler. Because circulation pumps are a lot smaller than jet pumps,
they have a very low amperage draw and operate at a fraction of the cost.
Waterway Tiny Might Circulation Pump
 | Larger, 303 stainless steel, 3/8" motor shaft
improves impeller stack-up height and won't rust. |
| Larger motor bearings for longer life. |
| Larger motor housing improves ventilation and
keeps motor cooler. |
| New wet-end made of state-of-the-art plastic
material. |
| Higher capacitor rating allows easy starting
when low voltage is encountered. |
|
 |
| Cast and machined front motor casing aligns wet-end
center to motor shaft, even when wet-end is rotated 90°. |
| Designed for 24 hour circulation. Uses less power than a 100 watt light bulb. |
(Pump unions sold separately or 1/2" I.D.
plumbing can be glued directly into wet end)
| Product |
Price |
Waterway Tiny Might 115 Volt
1/16 HP, 0.8 Amps, 60 Hz, 3200 RPM
1" Thread / 1/2" slip X 1" Thread / 1/2" slip
Model Number: TM-0061N11C
Part Number: 3312610-14 |
|
Waterway Tiny Might 230 Volt
1/16 HP, 0.4 Amps, 50/60 Hz, 3200 RPM
1" Thread / 1/2" slip X 1" Thread / 1/2" slip
Model Number: TM-0061N22C3 Part Number: 3312620-14 |
|
1" pump union with 1" slip tailpiece &
o-ring
(fits standard 1" I.D. flex hose or hard pipe)
(2 required per pump) |
|
Burning out a Tiny Might Every Year?
Tiny Might pumps are not high quality pumps, so if you find
you are replacing your pump every year or so, the motor is likely under
powered for your spa and you should consider retrofitting with the Iron
Might Pump. The pump is larger, so make sure you have room and you will
also need to purchase 2 pump unions.
Waterway Iron Might
Circulation Pump
| Product |
Price |
|
Waterway Iron Might 115 Volt
1/8 HP, 1.6 Amps, 60 Hz, 1725 RPM
1.5" Thread
Model Number: 3410030-1E |
|
|
Waterway Iron Might 230 Volt
1/8 HP, 0.8 Amps, 50/60 Hz, 1725 RPM
1.5" Thread
Model Number: 3410020-1E |
|
1 1/2" Pump Union with 1 1/2" tailpiece
(connects to 1.5 inch I.D. (1 7/8" O.D.) pipe).
PVC adapters may be required for your application and are available
at most plumbing stores.
** 2 unions required
per pump |
|
Laing Recirculation Pumps
Laing's advanced spherical motor design eliminates the
problems of conventional pumps. Laing has eliminated the problem shafts,
seals and bearings common to conventional mechanically sealed pumps. The
spherical design gives you a pump that is simple, compact and lightweight.
It is more dependable, less expensive to install and operate, is easier to
service in the field and has over 15 years of successful field service in
over a million installations worldwide.
| Seal-less, leak proof, canned motor centrifugal
circulating pumps |
| Specifically suited for water and mild chemical
applications |
| Self lubricating - no lubrication is ever required |
| Dry run cutout provided on pumps |
| Noryl Impeller |
| Ceramic Bearing Ball |
| 316 Stainless Steel Rotor and Separating Wall
|
| Carbon Graphite Bearing Cap
|
| EPDM O-Ring
|
| |
Product |
Price |
 |
Laing SM303BT Circulation Pump
115 Volt Brass Housing
1/2" NPT female thread fittings
230 °F max temperature
150 PSI max line pressure
33 Watts, 60 Hz, 0.30 Amps |
|
| Laing SM303BTV Circulation Pump
230 Volt Brass Housing
1/2" NPT female thread fittings
230 °F max temperature
150 PSI max line pressure
33 Watts, 60 Hz, 0.15 Amps |
|
Secondary pump bracket in picture is not included |
Laing SM909NT26 Circulation Pump 115 Volt Noryl Housing
3/4" male NPT thread fittings
140 °F max temperature
50 PSI max line pressure
98 Watts, 60 Hz, 0.95 Amps |
|
© 2000 - 2009 Hot Tub Essentials Inc. All rights reserved.
Serving the USA and Canada with quality hot tub spa
supplies, accessories, spa parts & hot tub cover lifts! |
