Hot Tub Cover Order Form

You can submit this form online, fax, email or phone this information to Hot Tub Essentials. For pricing information - click here

Cover Thickness & Density
4" - 2" Tapered - 1.0 lb foam
4" - 2" Tapered - 1.5 lb foam (best seller)
4" - 3" Tapered - 2.0 lb foam
5" Tapered - 2.0 lb foam

Cover Color
(To view colors - click here)

Select Spa Shape

Rounded Corners How to measure corner radius? click to see below	Rectangular	4 Cut Off Corners **be sure to measure the full length & width for a & b, as if the corners were not cut off.
Octagon All sides should be equal length for an octagon - otherwise you should order as 4 Cut Off Corners.	Hexagon	Round
1 Cut Off Corner If corners are rounded, provide radius as letter f. If corners are square leave f blank. How to measure corner radius? click to see below	2 Cut Off Corners If corners are rounded, provide radius as letter g. If corners are square leave g blank. How to measure corner radius? click to see below	Ellipse Measure corner to corner for a & b. Measure middle to middle for c & d.

Cover Measurements (as per above pictures)
Please provide all measurements in inches. When measuring your hot tub, add an inch to the overall length and width, to make sure the cover fits properly.
If you measure your existing cover, this is not necessary.

a)
b)
c)
d)
e)
f )
g)
** All shapes do not require all of the above measurements.

Cover Fold Direction
Cover will fold Vertically as illustrated by the line in the above diagrams (be sure your measurements correspond if you want your cover to open in a certain direction). If you want your cover to be split in the opposite direction, please change the selection below:

Fold cover vertically (as in pictures)
Fold cover horizontally (the opposite direction as the pictures)

Skirt Length (Vapor Flap) (in inches)

Locking Strap Length
(Measure from the bottom of the skirt to the end of the locking clip - include the clip in your measurement) (in inches)

Spa Manufacturer, Model and Year (if known)

Special Instructions

Your Name
email address
home phone (include area code)
work phone (include area code)

How to measure the corner radius on rounded corner hot tubs:

Use a carpenters square on the corner of your existing cover or on the corner of your hot tub. You want to measure from the inside corner of the square - to where the square first touches the cover.

It is important that you don't order your cover too small, but it is perfectly fine to be a little big. For example, if you are not sure if the radius is 5.5 inches or 5 inches, use the smaller measurement of 5 inches. By using the smaller measurement, less of the corner will be cut off and this will result in a larger cover.

If you have any questions about how to measure your cover, please contact us by phone or email and we will be happy to help!

GO TO THE MAIN COVER PAGE.


Home \| Store \| Spa Info & Troubleshooting \| Ordering \| Shipping \| Order Tracking \| Contact Us