Hydroquip 500 Series
Air Control Spa Packs

Hydroquip has over 20 years of experience in the designing and manufacturing of hot tub equipment. Proudly built in the USA, you can trust the name Hydroquip for quality and reliability and count on many years of trouble-free service.

Hydroquip 500 Spa Packs are engineered for easy installation, are very compact in size and mount directly on your pump with a threaded pump union. Backed by a 2 year "No Hassle" Parts Warranty.

Reverse Flow Option
(Flow is out the left side to the jets)

Features:

	Available in either 120V or 240V service supply
	120V model comes with a 15 foot GFCI cord that plugs into a standard wall outlet
	240V model comes with a 3 foot cord to be hard wired to a GFCI protected circuit
	2-speed pump circuit can be ordered to support a 120V or 240V pump (color coded 48" cord included)
	Blower circuit (color coded 48" cord included)
	Ozonator circuit (color coded 48" cord included)
	1.125 kW heater on 120V models / 4.5 kW heater on 240V models
	corrosion resistant PVC heater manifold
	Full range thermostat
	Heater ON light
	Pressure switch controlled heater to prevent the heater from operating without water in the heater housing

	High limit protection to prevent over-heating
	Heater disconnect unions - The pump union is a standard union that fits most 1-1/2 inch pumps. (Acura Spa Systems - Aqua Heat, Americana II, Aqua-flo, Flow Master, Hydro-dynamic, ITT Marlow, Martec, Premier, Ultra Jet, Vico and Waterway, are just a few of the 1-1/2" pumps they fit.) The actual outside diameter of the threads that fit these pump unions is approximately 2-3/8".
	Light receptacle on pack - If you do not have a 12 V light transformer with an air switch from your previous pack, you will need to add the light kit option that plugs into the light receptacle. The optional light kit comes in a tiny electrical box with an air switch to control the light. The light kit plugs into the spa pack and a top side air button is included to turn operate the light.
	Optional 24 hour timer
	Plug connected components (Color coded cords included for pump, blower & ozonator. Light cord is included in optional light kit).
	Compact design for easy installation - 16.5" length, 6.5" height from floor to top, 6.5" depth
	UL and ETL recognized

Valuable items included:

	Air buttons and tubing for pump and blower
	Color coded equipment cords for pump, blower and ozonator
	Internally mounted thermostat probe drywell
	Quick disconnect unions with o-rings
	Installation and operation manuals

Hydroquip 500 - 120 Volt Includes 15 Amp GFCI on 15' cord to plug into a standard wall outlet - 120 Volt - 1.125 kW heater - 120 Volt pump, blower and ozonator circuit - 120 Volt light circuit (light kit optional - includes cord, 12V transformer, air switch and air button) Free Shipping & Handling! We will determine the part number based on options selected; CS500-A 15amp or CS500T-A 15amp (followed by "R" for reverse flow).	$ 349.99 US Flow Direction Optional 24 hour timer Optional Light Kit Quantity:
Hydroquip 500 - 240 Volt Requires neutral wire for hookup - (4 wires including ground) - 240 Volt - 4.5 kW heater - Select voltage for pump and blower circuit - 120 Volt ozonator and light circuit (light kit optional - includes cord, 12V transformer, air switch and air button) Free Shipping & Handling!* * Confirm your pump and blower voltage before ordering - these circuits are not convertible. We will determine the part number based on options selected; CS-500-C, CS-500-C9, CS-500T-C, CS-502T-C9 or CS500T-C9 (followed by "R" for reverse flow).	$ 344.99 US Pump & Blower Circuit Voltages Flow Direction Optional 24 Hour Timer Optional Light Kit Quantity:
Hydroquip 500-3W - 240 Volt Does not use a neutral wire for hookup - (3 wires including ground) - Standard with 24 hour timer - 240 Volt - 4.5 kW heater - 240 Volt pump, blower and ozonator circuit - 240 Volt light circuit (light kit optional - includes cord, 12V transformer, air switch and air button) Part Number: CS500T-C3W (followed by "R" for reverse flow).	$ 384.99 US Flow Direction Optional Light Kit Quantity:

Product Notes:
The light kit doesn't come with the light housing that is mounted through a hole in your spa. You can order it here.

If you do not have an ozonator or blower, you will still receive these circuits so you have the option of adding these components to your spa pack in the future. (Pumps, blowers and ozonators for the above system are sold separately.)

The 120 Volt system comes with a 15 Amp GFCI on a 15 foot cord to be plugged directly into an outlet. The 220 Volt systems do not come with an internal GFCI and must be hard wired to a GFCI protected line.

For all of our spa packs, see our pump and heater page.


Home \| Store \| Spa Info & Troubleshooting \| Ordering \| Shipping \| Search \| Contact Us

Hydroquip 500 Series Air Control Spa Packs

Hydroquip 500 Series
Air Control Spa Packs