Welcome to our
US Store
For our Canadian Store
CLICK HERE
|
|
Hot Tub and Spa Jet Pumps
| Sta-Rite Dura 48 Frame Jet
Pumps
Sta-Rite has earned the reputation of building the best 48 frame
pumps in the spa industry, however they are generally very
expensive. While supplies last, we can
offer these premium pumps for an amazing price. Pumps
are new (not rebuilt) and come with full factory warrantee. Pump
cord not included.
Pump unions sold separately,
see Waterway Unions below. Uses common 2"
union, available to fit 2" or 1.5" plumbing.
Note: 2" unions measure 3" on threads. |
(Wet end can be rotated
for top or side discharge)
Special Truckload Purchase
Amazing Price!
Free Shipping! |
Sta-Rite Dura Jet Pump 48
frame, Side Discharge
1.5 HP, 230 V, 2 Speed (7.2 Amps High, 2.4 Amps
Low) |
|
Sta-Rite Dura Jet Pump 48
frame, Side Discharge
3.0 HP, 230 V, 2 Speed (12.0 Amps High, 3.7 Amps
Low)
This is a true rated pump - output will compare with Waterway 4.5
HP. |
|
Waterway Executive 48 Frame Pumps
The most modern and advanced Waterway 48 frame - also
recommended for replacing older Waterway Hi-Flo and Super Flo Pumps.
-Executive wet end designed specifically for 48
frame motors
-Thermally protected to extend life expectancy of motor
-2 inch intake and discharge
-Wet end can be easily rotated for easy installation
-Large 6.5 inch diameter wet end for higher head pressure
(pump cord and unions not included) |
Side Discharge
(Wet end can be rotated
for top or side discharge)
|
|
Executive 48 Frame Pumps |
Price |
|
| Waterway 1.5 HP -
EXECUTIVE 48 Frame, 2 Speed 115 Volt |
$ 299.99
US |
|
| Waterway 1.5 HP -
EXECUTIVE 48 Frame, 2 Speed 230 Volt |
$ 299.99
US |
|
| Waterway 2.0 HP -
EXECUTIVE 48 Frame, 2 Speed 230 Volt |
$ 319.99
US |
|
| Waterway 3.0 HP -
EXECUTIVE 48 Frame, 2 Speed 230 Volt |
$ 349.99
US |
|
| Waterway 4.5 HP -
EXECUTIVE 48 Frame, 2 Speed 230 Volt |
$ 379.99
US |
|
2 inch Pump Union,
1.5 inch tailpiece
(use this union if connecting to 1.5 inch I.D.
(1 7/8" O.D.) flex
or hard pipe) |
$ 6.04
US
**2 required
per pump |
|
2 inch Pump Union, 2 inch tailpiece
(use this union if connecting to 2 inch I.D.
(2 3/8" O.D.) flex or hard pipe) |
$ 6.24
US
**2 required
per pump |
|
|
Waterway
Executive 56 Frame Pumps
-Executive wet end designed
specifically for 56 frame motors
-Two double shielded ball bearings with moisture resistant grease
for quieter operation and longer life
-Two speed motors have four sets of insulated windings for increased
efficiency
-56 frame motor for added strength, cooler operating temperature and
longer motor life
-Large 2.5 inch intake for improved flow performance & reduced noise
-Split capacitor, (start and run) for less energy consumption
-Thermally protected to extend life expectancy of motor
-Wet end can be easily rotated for easy installation
-Large 6.5 inch diameter wet end for higher head pressure
(pump cord and unions not
included)
|
Side Discharge
(Wet end can be rotated
for top or side discharge) |
|
Executive 56 Frame Pumps |
Price |
|
| Waterway 1.0 HP -
EXECUTIVE 56 Frame, 2
Speed 230 Volt |
$ 349.99 US |
|
| Waterway 2.0 HP -
EXECUTIVE 56 Frame, 2
Speed 230 Volt |
$ 359.99 US |
|
| Waterway 3.0 HP -
EXECUTIVE 56 Frame, 2
Speed 230 Volt |
$ 379.99 US |
|
| Waterway 4.0 HP -
EXECUTIVE 56 Frame, 2
Speed 230 Volt |
$ 399.99 US |
|
| Waterway 5.0 HP -
EXECUTIVE 56 Frame, 2
Speed 230 Volt |
$ 429.99 US |
|
2" x 2" tail piece
Pump Union (use this union for connecting the
discharge side to 2.0 inch
I.D.
(2 3/8" O.D.) flex or hard pipe)
** 2" & 2-1/2" union required
per pump |
$ 6.24 US |
|
2 1/2" x 2" tail piece
Pump Union (use this union for
connecting the suction side to 2.0 inch I.D. (2 3/8" O.D.) flex or
hard pipe)
** 2" & 2-1/2" union required
per pump |
$ 9.08 US |
|
2 1/2" x 2 1/2" tail piece Pump Union
(use this union for connecting the
suction side to 2.5 inch I.D. (2 7/8" O.D.) flex or hard pipe)
** 2" & 2-1/2" union required
per pump |
$ 9.31 US |
|
|
Waterway Center Discharge 48
Frame Pumps
-Reliable center discharge performance
-1 1/2" intake and discharge
-Wet end can be rotated for easy installation
(pump cord and unions not included) |
Center Discharge
(Wet end can be rotated
for top or side discharge) |
|
Center Discharge 48 Frame Pumps |
Price |
|
| Waterway 1.0 HP -
Center Discharge, 2 Speed 115 Volt |
$ 309.99
US |
|
| Waterway 1.5 HP -
Center Discharge, 2 Speed 115 Volt |
$ 319.99
US |
|
| Waterway 1.5 HP -
Center Discharge, 2 Speed 230 Volt |
$ 319.99
US |
|
| Waterway 2.0 HP -
Center Discharge, 2 Speed 230 Volt |
$ 349.99
US |
|
| 1 1/2" Pump Union with 1 1/2" tailpiece
(use to connect to 1.5 inch I.D. (1 7/8"
O.D.) flex or hard pipe) |
$ 5.28
US
** 2 required
per pump |
|
© 2000 - 2006 Hot Tub Essentials Inc. All rights reserved.
Serving the USA and Canada with quality hot tub products
and superior service! |
