The Universal Spa Cover Remover will work on almost any spa and you can mount the lift to your deck or to the spa! Features adjustable mounting brackets that will fit most radius corners and cabinet designs. The square tube design adds incredible strength and lifting power.

If mounting on the spa, you can mount up high for privacy, or down low for a less obstructed view. With deck mounting, it can be mounted down low on a low deck, or up higher if the spa is, partially or completely, sunk-in a deck. Many owners of round or octagonal shaped spas, use this remover by mounting it on their deck. It is easy to install (comes 90% pre-assembled) and is very ease to use. Durable, 100% weather resistant - made of anodized aluminum, stainless steel and fiberglass reinforced polycarbonate. 1 year warranty.

Limitations of this cover lift:

• Maximum Cover Width - 96"
• Clearance required - Rear 6 - 8" - when mounting brackets up high on cabinet, you require clearance for the thickness of your spa cover. Up to 22" clearance is required when mounted down low on the spa or deck. Sides require 3" clearance.
•   Will it work for In-Deck Spas? - Yes, It can be mounted to the deck if the deck is slightly lower than the top of the acrylic, it can be deck mounted on a spa partially sunk-in, or can be mounted on the side of a spa.
• Will work on Octagon, Round or Hexagon shaped spas when mounted on a deck.
• If your spa cabinet has rounded corners and you are mounting to the spa cabinet, the maximum corner radius this will work on is 13" (see below to measure the cabinet radius).

How to measure the corner radius of Rounded Corner spas:

Download the Directions for Assembling, Installing and Using the Universal Spa Cover Lifter by clicking here.