Hydroquip 500 - Mechanical (Air Button) Spa Pack

Hydroquip 500 - Mechanical (Air Button) Spa Pack

Hydroquip 500 - Mechanical (Air Button) Spa Pack
Our Price US $349.99
Model
Light Options
Quantity

SKU CS500

Hydroquip 500 Spa Packs are compact in size and mount directly on a 1-1/2" pump with a threaded pump union. 
(The pump union is a standard union that fits most 1-1/2 inch pumps. 1-1/2" pump threads measure 2-3/8" Outside Diameter on the threads. Acura Spa Systems - Aqua Heat, Americana II, some Aqua-flo, Hydro-dynamic, ITT Marlow, Martec, Premier, Ultra Jet, Vico and some Waterway are some of the 1-1/2" pumps they fit.)

Features:

  • Corrosion resistant PVC heater manifold
  • Full range thermostat
  • Heater ON light
  • Pressure switch controlled heater to prevent the heater from operating without proper flow in the heater housing
  • High limit protection to prevent over-heating
  • Heater disconnect unions
  • Includes an Auxiliary receptacle, usually used for a light kit that is sold separately.
  • Compact design for easy installation - 16.5" length, 6.5" height from floor to top, 6.5" depth
  • UL and ETL recognized

Available Models (Confirm main power voltage, pump voltage and blower voltage before ordering - these circuits are not convertible):

Model Main Power
and Heater
Pump & Blower & Auxiliary Circuit Voltages Timer Cord Description Flow Direction
CS500-A 15A 120V All Circuits 120V None 15 Foot Cord with Cord End 15-Amp GFCI Plug *Install Reverse or Standard Flow
CS500-C **240V All Circuits 120V None 3 Foot bare wire cord *Install Reverse or Standard Flow
CS500T-A 15A 120V All Circuits 120V 24 Hr 15 Foot Cord with Cord End 15-Amp GFCI Plug Standard Flow
(Left to Right, like in pictures)
CS500T-AR 15A 120V All Circuits 120V 24 Hr 15 Foot Cord with Cord End 15-Amp GFCI Plug Reverse Flow
(Right to Left, opposite of pictures)
CS500T-C **240V All Circuits 120V 24 Hr 3 Foot bare wire cord Standard Flow
(Left to Right, like in pictures)
CS500T-CR **240V All Circuits 120V 24 Hr 3 Foot bare wire cord Reverse Flow
(Right to Left, opposite of pictures)
CS500T-C9 **240V Pump Circuit 240V, Blower Circuit 120V, Aux 120V 24 Hr 3 Foot bare wire cord Standard Flow
(Left to Right, like in pictures)
CS500T-C9R **240V Pump Circuit 240V, Blower Circuit 120V, Aux 120V 24 Hr 3 Foot bare wire cord Reverse Flow
(Right to Left, opposite of pictures)
CS500T-C-3W ***240V All Circuits 240V 24 Hr 3 Foot bare wire cord Standard Flow
(Left to Right, like in pictures)
CS500T-C-3WR ***240V All Circuits 240V 24 Hr 3 Foot bare wire cord Reverse Flow
(Right to Left, opposite of pictures)

*Note: Non Timer Models can be installed in Reverse or Standard Flow, because the thermostat is installed on the same end as the plug receptacles.
**Note: Standard 240V models require a neutral wire (Line 1, Line 2, Neutral & Ground).
***Note: CS500T-C-3W & CS500T-C-3WR (3 wire 240V Systems) do not use a neutral wire (Line 1, Line 2 & Ground). 

Valuable items included:

  • Air buttons and tubing for pump and blower
  • Color coded equipment cords for pump, blower and ozonator
  • Internally mounted thermostat probe drywell
  • Quick disconnect unions with o-rings
  • Installation and operation manuals
Optional Light Kit The Optional Light Kit can be added to your cart above and contains the following:
  • Enclosed box with 120V to 12V light transformer (240V to 12V on 3W Systems).
  • Air switch with an extra air button and air line.
  • Green molded power cord that plugs into pack.
  • 96" light wire harness and light bulb with bulb holder.
  • Translucent light wall fitting assembly.
  • Red and Blue colored light lenses.
  • Light Kit part numbers: 120V to 12V (37-0029-SM), 240V to 12V (37-0030-SM).

 

 

CS-500 Reverse Flow Direction Option

CS-500 Reverse Flow Direction Option

: *
: *
: *
Type the characters you see in the picture:
Captcha

*