Hydroquip 6100 Electronic Spa Pack

Hydroquip 6100 Electronic Spa Pack

Hydroquip 6100 Electronic Spa Pack
Our Price US $449.00
Main Power
2 Speed Pump Circuit
Ozonator Circuit
Heater Type

SKU CS-6100B-U

Hydroquip has over 30 years of experience in the designing and manufacturing of hot tub equipment. Proudly built in the USA, you can trust the name Hydroquip for quality and reliability and count on many years of trouble-free service.

Hydroquip Universal Spa Packs are engineered for easy installation and convertible for all voltage configurations. This spa pack can be wired to 110 Volts or 220 Volts. If you choose to hook up to 220 Volts for the main power supply, all component circuits can be configured for 110 Volts or 220 Volts.

More than just standard features:

  • Solid State electronic components and circuitry for increased reliability and accurate temperature settings
  • Programmable top-side control included. You can set the length of up to 3 daily filtration cycles. Digital temperature and functions read-out. Includes adapter plate for use if you currently have a larger top-side control.
  • Universal features - main power convertible for either 110V or 220V service supply
  • Universal 2-speed pump circuit - supports 110V or 220V (color coded 48" Smart Cord included)
  • Universal Ozonator circuit - supports 110V or 220V (color coded 48" Smart Cord included)
  • 1.4/5.5 kW, 110/220V heater in stainless steel manifold
  • Full range solid state thermostat for precision accuracy
  • 12V Light circuit with 96" cord
  • Freeze protection mode - if a low temperature is sensed the pumps and blower will purge the system every two hours in addition to the set filtration cycles
  • Internally mounted thermostat probe drywell
  • Heater ON light
  • Uses Balboa M7 technology to prevent heater from operating without proper water flow
  • Mis-wire protection circuit
  • Automatic time-out for light and pump
  • High limit protection to prevent over-heating
  • Foot mounting brackets
  • Compact design for easy installation - 15" heater housing (19.5" length to outside of white PVC unions), 11" height from floor to top, 3.5" depth
  • UL, cUL and ETL recognized

Valuable items included:

  • Digital top-side control with adapter plate (optional to use if replacing larger topside)
  • Color coded equipment cords
  • Heater fittings with o-ring gaskets
  • Installation and operation manual

Universal Electrical Features Explained: Your spa pack will be factory configured to the voltage specifications you provide above. However, the main service and individual component voltages can be easily changed if your needs change in the future. If you do not have an ozonator, the voltage does not to be specified upon ordering. You will still receive the ozonator circuit so you have the option of adding one to your spa pack in the future. (Pumps and ozonators for the above system are sold separately. You are only selecting the voltage for these components when adding the pack to your shopping cart.)

Note: This control system must be hooked up to a GFCI protected line.

Do you have a tight space where you need to install the heater?

The Versi-Heat - remote heater option allows you to place the heater anywhere under the spa skirt within 60 inches of the control box! This breakthrough in design eliminates any alignment and serviceability concerns you may have when installing in a difficult location.

Versi-Heat Option

Backed by a 2 year parts warranty.

Includes Digital Topside Control Panel

Includes Digital Topside Control Panel

: *
: *
: *
Type the characters you see in the picture: